Are you planning on building a swimming pool in your backyard? If yes, then you will need to know some basics about pools. A swimming pool can also be applied with a dehumidifier to keep the water clean and hygienic for use.
This article will give you some details on how they need care with the help of a dehumidifier.
Swimming Pool Dehumidifier
Both indoor and outdoor pools require some sort of dehumidifier. The size of the swimming pool room will determine the type of dehumidifier you will need to purchase for your pool.
However, most pools can be fitted with a window or whole house dehumidifiers. Keep in mind that your pool covers are not sufficient enough to stop the moisture in the air from entering the pool.
1. Indoor Pools
An indoor swimming pool will most likely be used all year round, which means that the indoor pool dehumidifiers must remove enough water to keep it ready for use at any time.
If you are planning on keeping the humidity level in the room below 50%, then a smaller unit should do. If you plan on keeping the air much drier, then a larger indoor pool dehumidifier is recommended.
2. Outdoor Pools
An outdoor swimming pool room requires a different approach as far as use is concerned. The humidity control levels in the air surrounding your pool will affect how much moisture you need to remove from the air for it to be ready for use.
If you live in an area with high humidity levels, then swimming pool dehumidifiers will need to remove about fifty percent of the moisture from the air before using your pool.
On the other hand, if your outdoor pool is located in a low humidity environment, such as desert regions, then you will not need to use as large of a pool dehumidifier. One that can remove thirty percent of the water from the air is sufficient enough for your needs.
Occupied and Unoccupied Modes (Pool Dehumidifiers)
As dehumidifiers are electric, indoor pool dehumidifiers can be ramped up or down according to the demands of the facility. They might be running at a certain amount of exhaust and replacement outside air during normal operation.
The amount of air change can increase during swim training or meets (event mode or purge mode), but it can also decrease when no one is in the pool overnight (unoccupied mode).
Indoor pool covers that prevent evaporation can considerably lower the amount of moisture the PDU has to manage, so it might be as low as a standard unoccupied mode. It all depends on your facility.
Pool Dehumidifier Options
A humidistat started its dehumidifier after feeling the presence of humidity in its environment. It stopped as soon as the optimal humidity threshold of the room has been reached. An automated changeover thermostat controls the heat and cooling of the room through an optional remote condenser.
Dehumidifier moisture products for pools are a reliable choice for comfortable indoor pools. For larger pools, it may be necessary to use more than one unit. The air exhausted from your pool can contain both moisture and chemicals including chlorine gas.
Why Are Dehumidifiers Needed in Indoor Pool Environments?
The National Association of Cooling, Heating, and Refrigerating Engineers recommend in a natatorium that relative humidity be around 70% to 60%.
Low relative humidity raises costs and can result in a swimmer's discomfort after their body is washed out of the pool because it affects evaporative cooling processes.
Dehumidification monitoring helps build structural elements to protect lighting and interior furnishings of buildings and support systems that protect their functions.
Related Article: What is a Dehumidifier? (Benefits and Uses)
Ventilation Isn't Enough
Dehumidification also should be a priority in the winter. While it may seem logical to throw open windows and doors for dehumidifying, this can increase your pool water heating costs.
An industrial dehumidifier will help mitigate the issues of humidity while helping you to keep your heating costs down. The refrigerant dehumidifier moisture products for pools will keep your facility comfortable, dry, and healthy.
It can be hard to imagine that the building's humidity would affect someone outside of the pool. It is important to understand that indoor pools are not just about creating a comfortable workout environment - they are also about maintaining good air quality.
Excess Moisture of Indoor Pool Rooms
Indoor swimming pools and even spa rooms are susceptible to excessive humidity building up when the water is heated for swimming. This moisture is full of indoor air pollutants including chlorine and bromine disinfectants.
These harmful substances may cause problems for people with mold and mildew as well as occupants' health. Pool room dehumidification is crucial for people's welfare and the integrity of all the building's infrastructure, according to expert services.
Swimming Pool Room Dehumidifiers Systems and Units
Dehumidification systems for pools are important to homeowners regardless of whether they have indoor or outdoor swimming pools.
Indoor pool dehumidifiers in these rooms are for moisture removal that is produced when the pool water is heated. This reduces humidity levels in the room, which can prevent damage to infrastructure. It also prevents any chemical odors from becoming prominent throughout the house.
Dehumidifiers that are installed in the pool room remove moisture in the air and protect against corrosion, rust, pool water damage, peeling paint, rusting sheet metal, and other issues.
They also preserve the overall quality of indoor air by reducing microbial growth on damp surfaces.
Swimming Pool Dehumidification Systems: Commercial & Residential
Commercial Dehumidifier Systems
Commercial pool dehumidification systems are beneficial for water extraction. They can reduce storage tank levels of several gallons to just a few ounces per day.
These systems include piping, ports, drains, valves, pumps, and other features that make them an efficient choice for commercial buildings with indoor pools.
Related Article: Top 7 Best Commercial Dehumidifier (2021 Reviews Updated)
Residential Dehumidifier Systems
Residential dehumidification systems for pools can be installed as an auxiliary system or as a standalone heating and cooling alternative.
They also help to regulate humidity levels more effectively than simply opening doors and windows can. Residential pool dehumidifiers are not as large as commercial units, but they do the job well even on smaller pools.
Difference Between Air Conditioners and Dehumidifiers? (For Pools)
The indoor pool is never close to a typical bathroom. There is a need to eliminate moisture that reaches the surface. Installation of anything other than the best dehumidification system for indoor pools will likely be a costly mistake in the long term.
The only reason for having AC units installed in swimming pools is to reduce costs during the veal phase. The system is very costly and not an efficient dehumidifier. It cools the air but does not reduce humidity levels.
If you don't want to pay for a dehumidifier, make sure that your windows and doors are closed at all times. The colder it is outside, the better because heat from your home will be unable to escape.
Related Article: Dehumidifier vs Air Conditioning
Benefits of Pool Dehumidification
From homeowners to hoteliers, indoor pools, while incredibly enjoyable, can present problems for the owner. Pools are essentially a source of very high relative humidity.
This can create an ideal environment for mold growth, or worse, can cause damaging structural damage if unattended.
1. Avoid Mold and Other Issues
What should the humidity level in your indoor pool area be? Mold may not grow if the relative humidity level in an indoor pool room is below 60%.
Pool rooms are humid, therefore they need dehumidifiers with higher efficiencies than residential models can provide.
Adding a pool room dehumidifier to your indoor pool area lowers the chance of mold and moisture damage to the building components. Additionally, guests will feel more at ease in your pool room.
Related Article: Dehumidifier Help With Mold: How to Run and Top 5 Best
2. Reduce Energy Consumption Costs in the Pool Room
Conventional indoor pool rooms waste electricity by draining air from the outdoors. Replacement air flowing into water from the pool is generally more than ideal based on moisture level. Its actions destabilizing pools indoors.
Dehumidification regulates humidity and air temperature, creating stabilized room environments. Protecting your indoor swimming space investment is important. Protecting your swimming pool is vital so you can protect your investment and make it comfortable for swimming in the pool.
Dehumidification Systems for Private Indoor Swimming Pools, Wellness, and Therapy Areas
Indoor swimming pool systems, especially those with high air temperatures, have a propensity to utilize huge quantities of water. When the humid environment is not controlled, exposure to it might become uncomfortable and the subtropical climate can be hazardous to your heart.
An efficient air dehumidification system that actively reduces humidity levels provides a pleasant and comfortable environment for customers and staff while keeping the building.
The heat released by the heat pump circuit also enables pool water heating of the area. This can lead to an enormous save in the operating cost of air conditioners.
How Do I Choose the Right Dehumidifier for My Indoor Pool?
An indoor pools room is a place to breed for moisture and indoor health concerns. Installing an industrial pool room dehumidifier is the best way to control the humidity in your indoor pool room.
Commercial-grade dehumidifiers eliminate problems with humidity that can produce unpleasant areas and mold growth. The ideal humidity to an outdoor pool requires a humidity ratio below 60% to stop the growth of mold.
The correct size for the pool room is the most important part of this process. Choosing the right size is the key to the best pool interior size.
Pool Dehumidifier Sizing
Since the pool surface has a large amount of area, it generates a large quantity of evaporated water. The water surface contacting the air creates humidity.
Traditional home dehumidifiers will not effectively remove the excess moisture because they are insufficient to handle the volume.
The 190 Pints Per Day
This is ideal for 400-450 square feet of water surface area in an indoor pool. The unit possesses a 10-gallon water storage capacity and automatic restart function after a power outage.
The 110 Pints Per Day
This is ideal for 250 square feet of the water surface or less in an indoor pool. The unit possesses a 6-gallon water storage capacity and automatic restart function after a power outage.
Related Article: How Do I Pick the Right Size Dehumidifier?
Dehumidifiers Used in Swimming Pools FAQ
How to Configure a Dehumidifier for a Pool?
The dehumidifier for a pool can be configured by using a furnace blower and ductwork. The dehumidification system will be in the same room as the pool.
This dehumidifier is connected to the pool with flexible ductwork. Ducts must be carefully designed to reduce air resistance and noise generation.
What Is the Best Way to Dehumidify a Pool Enclosure?
The best way is to ensure that humidity does not enter the enclosure in the first place. This role can be played by installing a waterproof building.
However, this procedure is extremely expensive, the second solution requires the installation of industrial dehumidification equipment.
Why Not Build a Condenser Connected to a Pool to Heat the Pool Outdoors When Dehumidifiers Run?
An outdoor pool ideally has a temperature of 70 degrees Fahrenheit. It may present you with a cost-effective way to heat the pool, but it increases humidity levels in the room where your equipment is located.
Additionally, condensers can increase expenses and cause noise pollution if they are not properly designed.
